Custom Insulation Boston Worcester Blog

RSS Grab Custom Insulation Blog Feed

Insulation and Heating Efficiency Increase Home Value – Worcester, Boston

Joseph Coupal - Tuesday, December 31, 2013

Remodeled homes definitely have their appeal, but more and more, homes with energy efficient and environmentally friendly features are becoming a priority for prospective buyers. Home insulation can increase the desirability of your home.

According to the National Association of REALTORS 2012 Profile of Home Buyers and Sellers, nearly nine out of 10 recent home buyers said that heating and cooling costs were somewhat or very important when considering a home for purchase.

Realtors know that consumer demand for greener homes has grown considerably over the past several years. Going green has proven to be more than a trend; many people now seek out this way of living and want homes and communities that are more resource efficient and sensitive to the environment. As energy savings and green building features are becoming more important to buyers, sellers and businesses, it comes as no surprise that consumers are placing a higher value on properties with those features.

Homes with the right home insulation have lower energy costs. Simple math shows how a higher energy efficiency rating offers homeowners the opportunity to save more money in heating and cooling costs alone.

NAR data shows how features directly affecting monthly energy costs are important to buyers. 39% of survey respondents reported that a home’s heating and cooling costs were very important when considering a home for purchase.

Regionally, buyers in the north and south placed a greater importance on heating and cooling costs, most likely due to the more extreme temperatures in these areas of the country. Nearly 60 percent of buyers who bought homes built in 2011 said heating and cooling costs were very important.

As energy costs continue to rise, look for those numbers to increase right along with them.

While new construction features like lot design, preparation and development are fairly set in stone in an existing home, there are many options when it comes to energy efficiency (improvements that will make the home less expensive to operate and more comfortable to live in), home insulation, water efficiency  and indoor air quality.

While replacing HVAC or adding insulation may not be on the same level as a new kitchen or bathroom when it comes to appearances, they are definitely a smart way to use your remodeling budget. Not only will energy-efficient improvements start paying you back immediately, they will also make your home more comfortable no matter what season it is.

NWI Times

Add Home Insulation and Keep the Heat In – Worcester, Boston

Joseph Coupal - Monday, November 25, 2013

Winter is quickly coming and it is time to dig out warm coats and turn up the furnaces. That means that higher heating bills aren’t far off either. Heating costs are your largest home energy expense, why not make this the year to increase your insulation.

A well-insulated house is like dressing properly for the weather. A wool sweater will keep you warm if the wind isn’t blowing and it’s not raining. On a windy, rainy day, wearing a nylon shell over your wool sweater helps keep you dry and warm.

A house is similar. On the outside, underneath the brick or siding, there’s an air barrier that does the same thing — it keeps the wind from blowing through. Then there is the insulation (like your sweater) and a vapor barrier that helps keep moisture away from the house structure where it can do damage.

Signs of Insulation Problems

In the winter, cold walls and/or floors, high heating costs, uneven heating levels, mold on walls.

In the summer, uncomfortably hot inside; high cooling costs, ineffective air-conditioning system, mold in basement.

Insulation Effectiveness

R values are a way of labeling the effectiveness of insulating materials. The higher the R- value the more resistance to the movement of heat.

There are numerous types of insulation such as blanket or batting, spray foam, blown-in and wet spray insulation. Choosing the appropriate type to your specific need is important.

Installation also plays a large role in its effectiveness. Compressing insulation, leaving air spaces around the insulation and allowing air movement in the insulation all reduce the actual R value of the insulation.

Attic Insulation

The attic is often the most cost-effective place to add insulation. Usually, a contractor blows bown-in insulation into and over the top of ceiling joists. Batts insulation laid sideways on existing insulation is another solution. The air barrier at the ceiling line must be tight to ensure warm moist air from the house doesn’t get into the cold attic and condense in the winter. Check ceiling light fixtures, the tops of interior walls and pipe penetrations for air leakage. Ensure that soffit venting is not blocked by added insulation; baffles may have to be installed.

Basement Insulation

Basement walls are unique because they must handle significant moisture flows from both inside and outside the house.

Exterior insulation is the preferred method. Insulate the wall on the outside with rigid insulation suitable for below-grade installations, such as extruded polystyrene or rigid fibreglass. This works well with damp-proofing and foundation drainage as rigid fibreglass acts as a drainage layer, keeping surface and ground water away from the foundation. Basement walls are kept at room temperature, protecting the structure, reducing the risk of interior condensation and increasing comfort.

Interior insulation can also be used. When finishing the basement, batt insulation in stud cavities or extruded polystyrene and strapping on the face of perimeter walls is used. If the basement won’t be finished, then rolls of polyethylene-encapsulated fibreglass over the wall is installed.

Insulate and keep the heat in. For more information, contact Custom Insulation.

LFPress.com




Enter your email below to receive blog updates.

recent posts


keywords

Archive

HOME | ABOUT US | BLOWN-IN INSULATION | GUTTERS | REQUEST QUOTE | CONTACT US | EMPLOYMENT
SITEMAP | PRIVACY NOTICE

© Copyright 2017 Custom Insulation. Custom Insulation Company $$ 16 Jacques Street, Worcester, MA 01603 508-488-9999 info@custominsulation.com All Rights Reserved. Created and Maintained by WSI Pro Marketing